Top

Wire Management

Adhesive Backed Tie Mounts

Adhesive Blacked Tie Mounts

Novoflex Adhesive Backed Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. No tool is required for installation. Simply place the Adhesive-Backed Mount on the desired surface, and secure the cables with Cable-Ties.
The Continuous-Straight Pull Load is 1Kg/square inch (25.4mm) of adhesive. Operating Temperature for Adhesive: Upto 52C

Adhesive Blacked Tie Mounts

Novoflex
Part No.
Size
L X B X H
(mm)
Mounting
Method
For Max.
Cable Tie
Width “W” (mm)
Standard
Packing
TC1 (A) 28x28x6.2 Adhesive Foam Tape 5.5 100 nos.
TC2 (A) 19x19x7.1 Adhesive Foam Tape 4.0 100 nos.
TC12 (A) 130x130x5.5 Adhesive Foam Tape 2.5 100 nos.
TC40 (A) 40x40x8.2 Adhesive Foam Tape 9.5 100 nos.
Material: Polyamide Standard Colour: Natural White.

 

 

Screw Type Tie Mounts

Screw Type Tie Mounts

Novoflex Screw Type Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. The Saddle Design provides Maximum Stability to wire bundles. To apply, simply fix the Mount to the desired surface with a screw, and secure wire bundles with Cable Ties.

Novoflex
Part No.
Size

(mm)
Mounting
Method
(mm)
For Max.
Cable Tie
Width (mm)
Standard
Packing
TC1 (S) 28x28x5.2 5 mm Screw 5.5 100 nos.
TC2 (S) 19x19x6.1 4 mm Screw 5.5 100 nos.
TC3 (S) 13x12x7.2 3 mm Screw 8.5 100 nos.
TC4 (S) 22.5x16x9.8 6 mm Screw 8.5 100 nos.
TC5 (S) 15x9.4x6.8 3 mm Screw 5 100 nos.
TC6 (S) 17.8x12.7x8.20 4 mm Screw 5 100 nos.
TC40 (S) 40x40x7.2 6.4 mm Screw 9.5 100 nos.
Material: Polyamide Standard Colour: Natural White.

 

 

Push Mount Tie Mount

Push Mount Tie Mount

Use these cable tie mounts to anchor wire bundles or cables to walls, ceilings, desks or any other structure. To use simply push the head of the mount through the hole, fastening the mount there. Then pass the cable tie through the slot provided at the base of the mount.

Novoflex
Part No.
Size

H X W
(mm)
Mounting
Method
(mm)
For Max.
Cable Tie
Width "T" (mm)
Suitable
For
Plate
Thickness
TC 7 (P) 20x20.5 Push Mount in 6.4 mm hole Dia 8.0 1.8 - 2.3 mm
TC 9 (P) 25.8x20.5 Push Mount in 9 mm hole Dia 8.0 8 - 11 mm
Material: Polyamide. Standard Colour: Natural White.

 

 

Push Fit Snapper Clip

Push Fit Snapper Clip

A one piece non-conductive, fool proof holding device for fixing of Can Type Aluminum electrolytic capacitor which can be fitted easily and quickly. Application- just position it on the Capacitor and press the jaws togther. For maximum tightness a plier can be used to give that firmness and vibration resistance.The capacitor Holder can be released and reused again and again.

Standard Colour : Natural White.

Operating Temperature : -25° C to +85° C.

Push Fit Snapper Clip

Novoflex
Part No.
To Hold Cable Dia Panel Hole
Dia
Plate
thickness
Standard
Packing
Max. Min.
PSC 30 30 mm 24 mm 6.4 mm 0.6-2.0 mm 100 Nos.
Material: Polyamide.