Top

Circuit Board Accessories & Spacers

PCB Ejectors & Pullers

Speciality PCB Ejector

Speciality PCB

They are designed for use with most standard sheet metal card cage systems and can be used with virtually all major card support systems. It is attached by means of rivets to cards of 1.6 mm thickness and operate by lever action against card guide or mounting bar-providing both easy insertion & removal .

Standard Colour : Natural White.

Operating Temperature : -25° C to +85° C.

Speciality PCB

Novoflex
Part No.
Standard
Packing
CBE 3 100 Nos.
Material: Polyamide

 

 

PCB Ejector

PCB Ejector

They are designed for use with most standard sheet metal card cage systems and can be used with virtually all major card support systems. It is attached by means of rivets to cards of 1.6 mm thickness and operate by lever action against card guide or mounting bar-providing both easy removal & insertion.

Standard Colour : Natural White.

Operating Temperature : -25°C to +85°C.

PCB Ejector

Novoflex
Part No.
Mounting
Method
PCB
Hole Size
(mm)
PCB
Thickness
(mm)
Standard
Packing
CBE 3 Snap Type 2.8 1.6 100 Nos.
Material: Polyamide

 

 

PCB Ejector

Ejector

They are designed for pulling out PCB easily and safely. CBE-2 snaps into a 2.8 mm dia pre-drilled hole in a 1.6 mm thick PCB without aid of any tools, pins or rivets. The Flared Easy-grip tab provides lever action against guide, rack or chassis to eject board.

Standard Colour : Natural White.

Operating Temperature : -25°C to +85°C.

Ejector

Novoflex
Part No.
Standard
Packing
CBE 2 100 Nos.
Material: Polyamide

 

 

PCB Puller

Puller

Designed to allow close mounting of PCB as is required in high density packaging. Snaps into two 3.2 dia pre-drilled holes,1.6 mm thick PCB without the aid of pins or rivets. Curved tab provides fingertip grip for board insertion and removal.

Standard Colour : Natural White

Operating Temperature :-25° C to +85° C.

Puller

Novoflex
Part No.
Standard
Packing
CBP 1 100 Nos.
Material: Polyamide