Name: Buy Adhesive Backed Cable Tie Mounts - Novoflex
SKU: TC1 (A), TC2 (A), TC12 (A), TC40 (A)

Adhesive Backed Cable Tie Mounts

Novoflex Adhesive Backed Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. No tool is required for installation. Simply place the Adhesive-Backed Mount on the desired surface, and secure the cables with Cable-Ties.
The Continuous-Straight Pull Load is 1Kg/square inch (25.4mm) of adhesive.
Material: Nylon 6 (Polyamide). Resistant to Fungus, Corrosion and most mild acids.
Flammability Rating: UL94 V-2
Standard Colour: Natural White.
Operating Temperature for Adhesive: Upto 52°C.
Storage Conditions: To be stored in a cool, dark, dry place away from sunlight in a sealed condition.
Example Applications: Telecoms equipment, switchgear and control cabinets.

adhesive-backed-cable-tie-mounts-tc-series-diagram

SKU: TC1 (A), TC2 (A), TC12 (A), TC40 (A) Category: Tie Mounts

Novoflex Part No

Length (L) - mm

Width (W) - mm

Height (H) - mm

Foam Thickness (F) - mm

Max Cable Tie Width - mm

Standard Packing (Nos.)

Quantity

TC 1 (A)

5.3

0.8

100

TC 2 (A)

5.0

0.8

5.2

100

TC 12 (A)

13.4

4.3

0.8

4.0

100

TC 40 (A)

7.3

1.0

9.5

100

Description

Installation Instruction

Surface Preparation:

For the best result, Novoflex adhesive mounts should be applied to the clean, dry, grease-free surface. It is recommended that for each individual application a solvent or cleanser be used to thoroughly prepare the surface for mount installation to obtain the best result the following are recommended guidelines:

Proper Installation Techniques:

Pressure Sensitive Adhesive Mounts
For proper installation of adhesive mounts with foam tape, simply remove the release liner from the foam adhesive and place the mount in the desired location. Apply firm pressure to the mount to ensure proper adhesion. Avoid touching the adhesive prior to placing the mount on the surface.