Name: Fire Retardant Adhesive Backed Cable Tie Mounts - Novoflex
SKU: TC1 (A) FR, TC2 (A), TC12 (A), TC40 (A)

Fire Retardant Adhesive Backed Cable Tie Mounts

Novoflex Fire Retardant Adhesive Backed Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. No tool is required for installation. Simply place the Adhesive-Backed Mount on the desired surface, and secure the cables with Cable-Ties.
The Continuous-Straight Pull Load is 1Kg/square inch (25.4mm) of adhesive.
Material: Nylon 6 (Polyamide).Resistant to Fungus, Corrosion, and most mild acids.
Flammability Rating: UL94 V-0
Standard Colour: Natural White.
Operating Temperature: Upto 52°C
Storage Conditions: To be stored in a cool, dark, dry place away from sunlight in a sealed condition.
Example Applications: Telecoms equipment, switchgear and control cabinets.

fire-retardant-adhesive-backed-cable-tie-mounts-diagram

SKU: TC1 (A) FR, TC2 (A), TC12 (A), TC40 (A) Category: Tie Mounts

Novoflex Part Number

Length (L) mm

Width (W) mm

Height (H) mm

Foam Thickness (F) mm

Max. Cable Tie Width - mm

Quantity

TC 1 (A) FR

6.1

0.8

TC 2 (A) FR

5.8

0.8

5.2

TC 12 (A) FR

13.4

5.1

0.8

3.3

TC 40 (A) FR

7.2

0.8

9.5

Description

Installation Instruction

Surface Preparation:

For the best result, Novoflex adhesive mounts should be applied to the clean, dry, grease-free surface. It is recommended that for each individual application a solvent or cleanser be used to thoroughly prepare the surface for mount installation to obtain the best result the following are recommended guidelines:

Proper Installation Techniques:

Pressure Sensitive Adhesive Mounts
For proper installation of adhesive mounts with foam tape, simply remove the release liner from the foam adhesive and place the mount in the desired location. Apply firm pressure to the mount to ensure proper adhesion. Avoid touching the adhesive prior to placing the mount on the surface.